公司新闻

首页 > 公司新闻
永久模具教您如何正确清洁路沿石模具
发布人:管理员   发布时间:2021-6-28

路沿石模具生产基地应大力发展现代制造模具服务业,积极稳妥的延伸以模具制造为核心的产业链,只有这样才能使得模具更为迅捷的提升,道路也能变的更为通畅。

The production base of well cover mould should vigorously develop modern manufacturing mould service industry and actively and steadily extend the industry chain with mould manufacturing as the core. Only in this way can the mould be promoted more quickly and the road become more smooth.


永久模具厂从每一步做起,增强企业员工们的节能、环保意识,加大力度研究新型环保模具制造工艺。路沿石模具在使用一段时间之后,难免就会用脏。这个时候,就需要使用清洁剂进行清洁,但是,模具脏了,该使用什么进行清洁比较好呢?

Permanent Mould Factory starts from every step to enhance employees'awareness of energy saving and environmental protection, and intensify efforts to study new environmental protection mould manufacturing process. After a period of time, it will inevitably be dirty. At this time, it is necessary to use detergent to clean, but the mould is dirty, what should be used to clean better?

                              

不论硅质的还是蜡质,一般情况下如果用普通的洗模水或者溶剂油都能洗尽。但是如果路沿石模具复杂或者所用脱模剂的材质特别的话,必须用专业的洗模水。

Whether silicon or wax, in general, it can be washed out with ordinary mold washing water or solvent oil. But if the manhole cover die is complex or the material of the demoulding agent used is special, professional washing water must be used.

\洗模水具体操作首先,用一块柔和的布贴在模具上,倒上洗模水,如果模具积垢不严重一般3-4分钟即可,然后用刷子或布清洗模具。如果严重,时间长一点。最后,如果特别复杂的模具,需要用钢刷洗模的话,建议再进行抛光,而且选用的脱模剂一定要正确。

First of all, paste a soft cloth on the mould and pour the washing water on it. If the scale is not serious, the mould can be cleaned for 3-4 minutes. Then the mould can be cleaned with a brush or cloth. If it's serious, take a little longer. Finally, if a particularly complex die needs to be washed with a steel brush, it is recommended that polishing be carried out again, and the selected release agent must be correct.

上一篇:没有了